Reviewed August 22, 2026
Save to PinterestThe short answer
The sink is part of the countertop, not a later accessory. The cutout size, reveal, faucet holes, supports, and cabinet fit all come from the exact model. If those facts arrive after template, the shop may have to recut, reorder, or delay installation. Share the specification early so Granite Division can order, receive, and install the sink with your stone.
What does the templater actually record?
Field measurement records the installed cabinets, walls, overhangs, and the sink opening that will be cut in the shop. The templater is not guessing a generic bowl. They record the model, the way it mounts, and any faucet or soap holes in the stone.
If the sink is missing, the team can still measure cabinets, but they cannot freeze the cutout. That leaves a hole in the fabrication packet and a risk that the later model will not fit the piece that was already cut.
Why the manufacturer drawing beats a photo
A product photo does not give clip locations, reveal, radius, or the true outside dimensions. The shop uses the current specification sheet. Two sinks that look alike can differ by half an inch, which is enough to ruin a cutout or a tight cabinet.
If you are supplying the sink, bring the model number and, when asked, the physical sink. Fireclay and cast iron can vary. Stainless models can be revised. Confirm the revision the shop will cut.
Ordering, delivery, and installation sit on the same calendar
When Granite Division orders the sink, the lead time has to land before fabrication, not after. A sink that ships after the stone is cut forces a hold, a rewrite, or a second trip. That is why the shop asks for the model while you are still choosing stone.
Delivery to the shop also lets the team inspect the sink, confirm the clips, and have it on the rack when the pieces are ready. Installation then sets the sink with the countertops instead of sending a plumber back to an empty opening.
What happens if the spec arrives late?
Late specs cause the most avoidable delays in a countertop job. The cabinet may be too narrow. The faucet holes may be in the wrong deck. The farmhouse apron may not match the door style. Fixing those after template costs time and can change the quote.
If you are still comparing two models, save both in the planner and tell your project specialist which one is the current favorite. Do not wait for the installation week to decide.
What should you send this week?
Send the brand, model number, mounting type, bowl layout, and a link or specification sheet. Add the cabinet width if you know it. Save the sink in your project planner so the preference sits with your stone and edge choices.
If you already bought the sink, say so and tell us where it is. The shop would rather receive it early than discover a surprise on install day.
Turn research into a working range
Share the room, material direction, and rough dimensions.
Questions homeowners ask us
Can the shop cut a sink opening from a photo of my current sink?
A photo helps identify a direction. Fabrication still needs a model number or the physical sink so the cutout matches clips, radius, and outside dimensions.
Who orders the sink?
You can buy it or ask Granite Division to order a reviewed model. Either path still needs the specification before template.
Does saving a sink in the planner freeze the job?
No. A saved sink is a preference. The job freezes the model after the team reviews the specification and, when required, the physical sink.
Related planning guides
Sources used for this guide
Turn the guide into a project plan.
Bring room photos, rough dimensions, and the choices you have already made. We will help identify the next decision and compare the physical materials in Tyler.
Schedule a planning appointment